Swann Recorders & Cameras on a Mac

Swann DVR / NVR kits; every camera as a channel over RTSP · Cameras

Swann sells DVR and NVR security kits (the SwannView Link and Swann Security apps). Most Swann recorders stream every attached camera over RTSP from the recorder's own IP, so you don't need the Swann app or cloud on your LAN. Streams. Channel 1's main stream is rtsp://:@:554/ch01/0 and its sub stream /ch01/1; change ch01 to ch02, ch03 and so on for the other cameras. Sign in with the recorder's admin account or a user you create in its menu. In AV Feeds ▸ Add a Camera, pick Swann DVR / NVR and the channel and the URL is built for you. Ports. The recorder's Network settings list its HTTP (usually 85), RTSP (554) and media (9000) ports. If the RTSP port was changed there, type the recorder as : in Add a Camera. Other Swann lines. A few older recorders are made by Hikvision and use /Streaming/Channels/101; some cameras are Reolink-made and use /h264Preview_01_main. If the Swann path doesn't connect, pick Hikvision or Reolink as the make instead. Many Swann Security Wi-Fi and battery cameras have no local stream at all; only the app shows them. Status. Pin the recorder in Device Discovery as Swann DVR / NVR / Camera for RTSP and web-port checks and an offline alert. Swann publishes no local API for the recorder's hard drive, so drive health stays in the recorder's own menu. Security. Set a strong admin password, keep the recorder off the Internet (no port-forwarding; use Tailscale), and update its firmware from the recorder's menu.

Run Swann Recorders & Cameras with FrontierStack

Install or connect Swann Recorders & Cameras; then check its status, ports and certificate from FrontierStack. The same screen links to firewall checks, Malware Audit and backups where they apply.

Related in Cameras

• motionEye
• RTSP Cameras
• ONVIF Cameras
• go2rtc
• Tapo Cameras
• Hiseeu Cameras & NVR Kits
• Anker eufy Security Cameras
• WTW (塚本無線) Cameras