ホーム › サービス › Home Automation

Home Automation:10 件のソリューションを比較

Home Automation のツールで、セルフホストや Mac での実行、連携ができるものは? FrontierStack のカタログには Home Automation の選択肢が 10 件あります:Aqara, ESPHome, Eve, Home Assistant, Homebridge, Music Assistant ほか。10 件は、FrontierStack が Mac やサーバにインストールするか、すでに運用中の環境に接続し、該当する場合は状態・ポート・証明書を確認します。

サービスの説明文は、アプリのカタログに準拠して英語で表示しています。
名前種類FrontierStack でできること
Aqaraセルフホストまたは連携インストールまたは接続し、該当する場合は状態・ポート・証明書を確認
ESPHomeセルフホストまたは連携インストールまたは接続し、該当する場合は状態・ポート・証明書を確認
Eveセルフホストまたは連携インストールまたは接続し、該当する場合は状態・ポート・証明書を確認
Home Assistantセルフホストまたは連携インストールまたは接続し、該当する場合は状態・ポート・証明書を確認
Homebridgeセルフホストまたは連携インストールまたは接続し、該当する場合は状態・ポート・証明書を確認
Music Assistantセルフホストまたは連携インストールまたは接続し、該当する場合は状態・ポート・証明書を確認
Node-REDセルフホストまたは連携インストールまたは接続し、該当する場合は状態・ポート・証明書を確認
Nori / SuperNori AIセルフホストまたは連携インストールまたは接続し、該当する場合は状態・ポート・証明書を確認
openHABセルフホストまたは連携インストールまたは接続し、該当する場合は状態・ポート・証明書を確認
Philips Hueセルフホストまたは連携インストールまたは接続し、該当する場合は状態・ポート・証明書を確認

Aqara

Zigbee/Thread sensors, hubs and radar presence sensors

Aqara (Lumi United Technology) makes low-cost smart-home hardware: contact, motion, temperature, vibration and leak sensors, plugs, curtain motors, locks, camera hubs, and the FP-series mmWave radar presence sensors (FP1/FP2 over Wi-Fi; FP300 and FP400 over Thread, with some models also supporting Wi-Fi). Most sensors speak Zigbee and need an Aqara hub (M1S/M2/M3) — or any Zigbee coordinator, which is the more useful route here: paired to Zigbee2MQTT or deCONZ, they appear in the Zigbee pane with their vendor, model, on/off state and link quality, and can be controlled without Aqara's cloud. Aqara's hubs also expose devices to HomeKit and Matter. The FP-series radar sensors detect presence rather than motion, so they hold a room 'occupied' when nobody is moving — better for lighting and occupancy automations than a PIR, at the cost of needing careful zone setup. Thread caveat: a Thread accessory has no IP address on your LAN and cannot be found by a network scan. Device Discovery sees the Thread Border Router it connects through (a HomePod, HomeView, Apple TV 4K, Nest Hub or an Aqara hub, advertised as _meshcop._udp), not the sensors behind it — so a Thread sensor missing from the device list is expected, not a fault.

FrontierStack は Aqara を Home Automation カタログに収録しています。ひとつの場所でインストール/接続し、状態・ポート・証明書を監視、ファイアウォールと保護機能の確認で保護し、バックアップできます。 詳細ページ →

ESPHome

Firmware for ESP IoT devices (Home Assistant)

ESPHome builds and flashes firmware for ESP8266/ESP32 devices from simple YAML, integrating them with Home Assistant. pip install esphome or Docker; dashboard on :6052.

FrontierStack は ESPHome を Home Automation カタログに収録しています。ひとつの場所でインストール/接続し、状態・ポート・証明書を監視、ファイアウォールと保護機能の確認で保護し、バックアップできます。

Eve

Eve Energy smart plugs and Eve sensors (HomeKit / Matter) via Home Assistant

Eve (Eve Systems, formerly Elgato Eve) makes HomeKit and Matter accessories: the Eve Energy smart plug and outlet with power metering, Eve Room (indoor air quality, temperature, humidity), Eve Weather, Eve Degree, Eve Door & Window, Eve Motion, Eve Water Guard leak detection, Eve Thermo radiator valves, Eve Aqua irrigation, light switches and blinds. Most current models connect over Thread, older ones over Bluetooth. How FrontierStack reaches them. Eve offers no cloud or network API, and macOS keeps HomeKit to Apple's own apps, so FrontierStack reads Eve accessories through Home Assistant. Add them there with the HomeKit Device integration, or share them from the Eve or Home app as Matter devices (Matter multi-admin keeps them in Apple Home as well). FrontierStack then finds every Home Assistant device made by Eve and lists it with live readings: on/off and watts for Eve Energy, temperature, humidity, air quality, pressure, door, motion, water and battery for sensors. - Eve Energy → Power Control: one click adds the plug as a Home Assistant outlet, so it can be switched (with confirmation), show its watts, and power-cycle a linked server that stops responding. - Sensor alerts: one-click rules such as *above 35 °C*, *water detected*, *door opened* or *battery below 15 %* become Home Assistant entity monitors and go through Alerts. - Offline and low battery: the bell on each accessory raises an alert when it drops off the network or its battery runs low. Reading Eve devices uses Home Assistant's template API, which needs a long-lived token from an administrator account. Thread caveat: a Thread accessory has no IP address on your LAN, so Device Discovery sees only the Thread Border Router it connects through.

FrontierStack は Eve を Home Automation カタログに収録しています。ひとつの場所でインストール/接続し、状態・ポート・証明書を監視、ファイアウォールと保護機能の確認で保護し、バックアップできます。 詳細ページ →

Home Assistant

Open-source home automation hub

Home Assistant is the leading open-source home-automation platform — local control of thousands of device brands, automations, dashboards, and an MQTT integration. Install it four ways from the buttons below: Docker (Container) or a Python venv (Core) on this Mac, on a dedicated hub (Home Assistant Green / Yellow, which ship with HA OS), or by flashing Home Assistant OS to a Raspberry Pi (or ODROID / generic x86). Web UI on :8123; pairs with Mosquitto for MQTT and the Matter/Zigbee bridges here.

FrontierStack は Home Assistant を Home Automation カタログに収録しています。ひとつの場所でインストール/接続し、状態・ポート・証明書を監視、ファイアウォールと保護機能の確認で保護し、バックアップできます。

Homebridge

Bridge non-HomeKit devices to Apple Home

Homebridge emulates the HomeKit API so non-HomeKit smart devices appear in Apple's Home app and Siri. Its web UI (port 8581) manages plugins and accessories. Install options: via Homebrew + npm — brew install node then sudo npm install -g --unsafe-perm homebridge homebridge-config-ui-x, run with hb-service install (launchd); or Docker — docker run --net=host -v homebridge:/homebridge homebridge/homebridge; or the official macOS installer (the link). Keep it running headless via hb-service or Docker.

FrontierStack は Homebridge を Home Automation カタログに収録しています。ひとつの場所でインストール/接続し、状態・ポート・証明書を監視、ファイアウォールと保護機能の確認で保護し、バックアップできます。

Music Assistant

Self-hosted music library + multi-room player server (Home Assistant companion)

Music Assistant is an open-source music server that joins your streaming services and local files (Spotify, Apple Music, Tidal, Qobuz, YouTube Music, Plex, Jellyfin, Subsonic/Navidrome, a file share…) into one library, and plays it on almost any speaker: AirPlay, Google Cast, Sonos, Squeezebox/Lyrion, Snapcast, DLNA, and HA media players — including synced multi-room groups. It is the Home Assistant team's music project and pairs with the Music Assistant integration in HA, but runs on its own server. Install it as a Home Assistant app (Settings ▸ Apps — the recommended route on HA OS) or as a Docker container on Linux: docker run -d --network host -v ma-data:/data ghcr.io/music-assistant/server. Host networking is mandatory (player discovery and streaming need the same layer-2 network as the speakers), and macOS/Windows are not supported hosts — Docker Desktop's VM hides the LAN from it. Web UI on :8095; audio streams to players on :8097. FrontierStack's Music Assistant monitor (below) connects with a long-lived token (MA ▸ Settings ▸ Profile) and raises Alerts when the server stops answering, a music or player provider fails to load or needs re-authentication, or a speaker you watch drops offline. Read-only: it never starts playback or changes settings.

FrontierStack は Music Assistant を Home Automation カタログに収録しています。ひとつの場所でインストール/接続し、状態・ポート・証明書を監視、ファイアウォールと保護機能の確認で保護し、バックアップできます。 詳細ページ →

Node-RED

Flow-based automation wiring

Node-RED is a flow-based, browser editor for wiring together devices, APIs, and MQTT topics — popular for gluing home-automation events to actions. Subscribes/publishes to your MQTT broker.

FrontierStack は Node-RED を Home Automation カタログに収録しています。ひとつの場所でインストール/接続し、状態・ポート・証明書を監視、ファイアウォールと保護機能の確認で保護し、バックアップできます。

Nori / SuperNori AI

AI family hub display + proactive family AI agent (cloud + device)

Nori (heynori.com) is an AI family assistant — shared calendars, tasks, meals, shopping lists and daily routines, used by 200k+ families — with real hardware: the Nori Family Hub, a wall-mounted anti-glare smart display (launched June 2026) that adds always-on wake and household sensing beyond the phone app. SuperNori (Domus Next, June 2026) is the proactive family-AI layer: it anticipates needs, resolves schedule conflicts, follows up on tasks and drafts grocery lists — acting across apps and smart-home devices *with confirmation*, via Android system-level integration and the Home Assistant ecosystem. That HA link is the automation hook here: run Home Assistant from its pane and SuperNori drives the same devices, so your HA instance stays the source of truth FrontierStack monitors. The hub is a consumer cloud device with no public API — Device Discovery classifies it as a smart hub on your LAN (pin it to watch reachability).

FrontierStack は Nori / SuperNori AI を Home Automation カタログに収録しています。ひとつの場所でインストール/接続し、状態・ポート・証明書を監視、ファイアウォールと保護機能の確認で保護し、バックアップできます。 詳細ページ →

openHAB

Vendor-neutral automation platform

openHAB is a vendor- and technology-agnostic open-source home-automation platform (Java-based) with bindings for thousands of devices and an MQTT binding. Run via Docker or a native package.

FrontierStack は openHAB を Home Automation カタログに収録しています。ひとつの場所でインストール/接続し、状態・ポート・証明書を監視、ファイアウォールと保護機能の確認で保護し、バックアップできます。

Philips Hue

Zigbee lighting, bridge API, wall switch module

Philips Hue (Signify) is the Zigbee lighting system: bulbs, light strips, plugs, motion sensors and dimmers, coordinated by the Hue Bridge. The bridge exposes a local CLIP v2 REST API over HTTPS (an application key, created by pressing the link button) and advertises itself over mDNS, so FrontierStack classifies it as a Smart Hub on the network. The Hue wall switch module is a battery-powered Zigbee unit that fits behind an existing wall plate, turning a normal light switch into a Hue controller: the fixture stays permanently powered so the smart bulbs keep working, and the physical switch sends Zigbee button events instead of cutting the mains. It solves the classic problem of someone flipping the switch and orphaning the bulbs. Like every Zigbee accessory, it has no IP address and cannot be found by a network scan — it appears through the Hue Bridge, or in the Zigbee pane when paired to Zigbee2MQTT or deCONZ instead of the Hue Bridge, where FrontierStack shows its vendor, model, link quality and battery level. It reports button presses rather than an on/off state, so it lists as a read-only device: there is nothing to switch on it, which is correct rather than a limitation.

FrontierStack は Philips Hue を Home Automation カタログに収録しています。ひとつの場所でインストール/接続し、状態・ポート・証明書を監視、ファイアウォールと保護機能の確認で保護し、バックアップできます。 詳細ページ →

すべてのサービスのジャンル →

すべてをひとつの Mac アプリで。

FrontierStack は、ローカルでもフリート全体でも、スタック全体のインストール・監視・保護をひとつのネイティブ macOS アプリで行います。パスワードも鍵も AI には見せないから、安全で安心です。

FrontierStack をダウンロード

Apple 公証済み · 安全・安心 · macOS 13 Ventura 以降