맥에서 TP-Link Kasa & Tapo

Kasa & Tapo plugs and strips switched locally in Power Control, plus bulbs and the kasa CLI · IoT

FrontierStack switches Kasa and Tapo Wi-Fi smart plugs and power strips itself, locally and with no extra software: add one in Power Control as *TP-Link Tapo / Kasa* (Tapo P100/P105/P110/P115/P125 and P300/P304M/P306 strips over TP-Link's KLAP protocol with your TP-Link ID; Kasa HS/KP/EP plugs and HS300/KP303 strips over KLAP or the older port-9999 protocol), one entry per strip outlet, and link it to a server for remote power-cycling. Kasa and Tapo are TP-Link's smart-home lines (plugs, bulbs, strips, wall switches, sensors). Control both locally — no cloud — with python-kasa and its kasa command-line tool: kasa discover finds devices on your LAN, kasa --host on|off switches them, and kasa --host state reads status. The same library also drives newer Tapo and Kasa-Matter devices — pass --username/--password for those. Install it from the buttons below (pip — or pipx install python-kasa for an isolated CLI), or use it through Home Assistant's TP-Link integration; manage devices in the Kasa / Tapo apps. (Tapo Wi-Fi cameras stream over RTSP/ONVIF — see Tapo Cameras under Cameras.)

FrontierStack으로 TP-Link Kasa & Tapo 실행하기

TP-Link Kasa & Tapo을(를) 설치하거나 연결한 뒤 FrontierStack에서 상태, 포트, 인증서를 확인하십시오. 해당되는 경우 같은 화면에서 방화벽 점검, 악성코드 감사, 백업으로 이동할 수 있습니다.

관련 IoT

• Zigbee2MQTT
• Z-Wave (Z-Wave JS UI)
• Matter
• Thread
• OpenThread Border Router
• Bluetooth (BLE)
• Bluetooth Beacons
• Anker SOLIX