맥에서 Yamaha RTX Routers

Yamaha RTX / NVR / FWX business routers (SNMP) · Routers & Firewalls

Yamaha RTX830, RTX840, RTX1220, RTX1300 and RTX3510, NVR510 and NVR700W, FWX120 and vRX: the routers in many Japanese offices, with native MAP-E and DS-Lite for IPoE lines (v6プラス, transix…). They have no REST API, so FrontierStack reads them over SNMP, read-only, using the v2c community or SNMPv3 user set in Device Discovery: model and firmware revision, CPU, memory, in-box temperature (where the model reports it), uptime, and the link state of every TUNNEL (MAP-E, DS-Lite, IPsec, L2TP) and PP (PPPoE) interface from Yamaha's private MIB. A tunnel or PPPoE session that has been up and goes down raises an alert; unused slots never do. On the router: snmpv2c host <this Mac> and snmpv2c community read-only <name> (or SNMPv3). Pin the router with New Router… and the Yamaha RTX platform. Restart uses Yamaha's yrfRestart with a separate SNMP read-write community, kept apart from monitoring and synced with a paired KeyRotate. v6プラス (MAP-E) Configuration… fills in Yamaha's own example (設定例 1) with your LAN address and DHCP range, ready to paste at the console after administrator; FrontierStack doesn't send it, because the console needs the administrator password interactively and a wrong line takes the office offline.

FrontierStack으로 Yamaha RTX Routers 실행하기

Yamaha RTX Routers을(를) 설치하거나 연결한 뒤 FrontierStack에서 상태, 포트, 인증서를 확인하십시오. 해당되는 경우 같은 화면에서 방화벽 점검, 백업으로 이동할 수 있습니다.

관련 Routers & Firewalls

• OPNsense
• pfSense
• PoE Switch (RFC 3621)
• TP-Link Omada
• NETGEAR Smart Managed Switches
• Cisco Meraki
• MikroTik (RouterOS)
• UniFi